The short answer
The Plimsoll line is the load line mark painted on the sides of a ship’s hull. It shows the deepest point to which the ship may be loaded safely, under the conditions that apply to the voyage. It is named after Samuel Plimsoll, the British MP whose campaign in the 1870s led to the rule becoming law. The modern system is an international standard based on that original idea.
What the mark shows
The mark is a circle with a horizontal line running through it. The horizontal line is the summer load line, the limit for normal summer conditions. Other marks on the same hull show the limits for other conditions. These include winter, tropical waters, fresh water and winter in the North Atlantic.
The marks matter because a ship’s safe load depends on the water it floats in and the season. Fresh water is less dense than seawater, so a ship sits lower in it and may be allowed a deeper load mark there. That allowance does not apply once the ship sails into salt water, and a ship loaded for calm summer seas could be overloaded for winter weather.
Samuel Plimsoll’s campaign
Samuel Plimsoll (1824–1898) was a Liberal Member of Parliament for Derby. He became concerned about ships that were overloaded and unsafe, which were sometimes called “coffin ships”. Owners could profit from insurance on overloaded voyages, and crews often had little say in whether a ship was fit to sail.
Plimsoll set out his concerns in his book Our Seamen (1873). He argued that Parliament should set a limit on how deeply ships could be loaded, and that the limit should be marked on the hull so that the load could be checked. His campaign attracted wide attention and put pressure on the government to act.
The laws that followed
The campaign led to British legislation in the mid-1870s. The Merchant Shipping Act 1876 made the load line mark part of the law for British ships. The rule required the mark to be placed on the hull, and it gave the authorities a basis for checking whether ships were loaded within the limit.
Over time the load line system was adopted by other countries. The International Load Line Convention of 1930 set common rules across many national fleets. A later convention in 1966 updated the system, and its rules remain the basis of load line practice today.
How the load line works today
Modern ships are surveyed and issued load line certificates, which set the freeboard, or distance from the waterline to the deck, for each loading condition. The marks on the hull show the limit, and officers check the load against it before a voyage. A ship that is loaded beyond its mark is breaking the rules, and it can be detained in port.
The idea behind the system is simple: a ship has a reserve of buoyancy above the waterline. If that reserve is too small, the ship is less able to ride out heavy seas. The mark makes that limit visible to anyone who can see the hull.
Why the mark still matters
The load line is one of the oldest safety rules in shipping. It works alongside other rules on stability, watertight compartments and structural strength. Even in a modern container ship, the mark is a visible check that the ship is loaded within the design limits.
Where the name “plimsolls” comes from
Canvas shoes with rubber soles were later called plimsolls in Britain. The name is often linked to the rubber band around the shoe, which was said to resemble the Plimsoll line. This is a common explanation, but it is not certain, and it should be presented as a popular account rather than as a settled fact.
For the wider story of how ships and seaborne trade developed, see the history of merchant ships and seaborne trade. For the steam era that changed the ships the load line rules applied to, see when the age of sail ended.